Instruction Manual

16
This controller has a feature to reduce energy consumpon during the
closing hours of your locale. To acvate this feature press the ES buon
on the controller. In this refrigerator, the Energy Saving mode has been
programmed to turn o the lights for one hour, or unl the door is opened.
The Energy Saving mode can also be deacvated by pressing the ES buon,
which will turn the lights back on.
1. Plug in the electrical cord of the unit to a wall outlet, following the
recommendaons about electrical installaon in this manual.
2. Let the cooler run with no product load for 2 hours, or let the
compressor complete three on/o cycles to assure that the
temperature inside is appropriate for the products before loading
them into the refrigerator.
3. Verify the internal illuminaon operaon by acvang the on and o
switch.
4. When placing products in the cooler, you should leave small gaps
between one and the other to assure free circulaon of air inside the
cabinet.
5. Do not leave the door open for extended periods of me, to avoid
increased temperature of the products.
6. Do not unplug your cooler during the night, since when you turn it
back on during the day the electrical consumpon will increase.
The temperature of a cooler should be between 34°F to 40°F.
USE OF YOUR COOLER WITH CAREL
ELECTRONIC THERMOSTAT
These coolers are provided with a versale electronic thermostat that
allows to cool dierent beverages.
To turn off the lights of the
cooler press the light bulb
symbol.
ENERGY SAVING MODE
SELECTOR
START UP THE COOLER