Service Manual

13. Use a knife to cut
the double sided
tape that holds in
place the evaporator
tray pan on the
compressor.
14. Warm the brazing of
the discharge and
suction tubes in
order to unsolder
them from the
compressor.
12. Separate the
discharge tubing
from the
compressor
evaporation tray.
15. To remove the filter
dryer, slowly warm
up the joint of the
capillary tubing with
the filter dryer and
pull them apart by
using pliers.
Instructions to Replace Compressor.
16. Remove the four
clips, pins and
washers that secure
the compressor to
the base rails.
DISCONNECT UNIT FROM POWER SUPPLY BEFORE DOING ANY SERVICE