Instruction Manual
11
9) Make sure the thrust washer is in place, then mount the door onto the lower hinge
bracket (nylon bearing over lower hinge bracket pin). See Fig. 13.
10) Secure the upper hinge bracket to the appliance. See Fig. 14.
11) Verify swing. Replace and secure the control panel and front panel in their correct
positions. Verify the door switch and lock function.
Fig. 11
8) Clear foam from the spring cartridge hole to allow for spring cartridge installation. Install
the spring cartridge and secure it to the door using the spring cartridge screws removed
in step 6. See Fig. 11. Next, align the upper hinge bracket to the door in the orientation
that allows for closed door installation. See Fig. 12. Secure the upper hinge bracket to
the door using the screw and washer removed in step 6.
Fig. 12
Fig. 13
Upper Hinge
Bracket Screw
Upper Hinge Bracket
Spring Cartridge
Door
Spring Cartridge Screws
Upper Hinge
Bracket Washer
Upper Hinge Bracket
Door
Lower Hinge
Bracket
Thrust
Washer
Fig. 14
Upper Hinge Bracket
Cabinet