Service Manual
Table Of Contents
- Important Safety Information
- I. Specifications
- II. General Information
- A. Construction
- B. Sequence of Operation
- C. Control Board
- 1. Control Board Layout
- 2. LED Lights and Audible Alarm Safeties
- 3. Controls and Adjustments
- a) Default Dip Switch Settings
- b) Harvest Timer (S4 dip switch 1 & 2)
- c) Pump-Out Timer (S4 dip switch 3 & 4)
- d) Pump-Out Frequency Control (S4 dip switch 5 & 6)
- e) Harvest Pump Timer (S4 dip switch 7)
- f) Factory Use (S4 dip switch 8)
- g) Freeze Timer (S4 dip switch 9 & 10)
- h) Float Switch Control (S5 dip switch 1)
- i) Refill Counter (S5 dip switch 2 through 5)
- D. Control Switch
- III. Technical Information
- IV. Service Diagnosis
- V. Replacement of Components
- VI. Cleaning and Maintenance
22
h) Float Switch Control (S5 dip switch 1)
NOTICE
Factory set. Do not adjust. Otherwise, the unit will not operate correctly.
S5 dip switch 1 allows for single or double oat switch applications. The KMS-830MLH
uses a single oat switch.
S5 Dip Switch Setting
Single or Double Float
Switch Application
No. 1
OFF Single
ON Double
i) Rell Counter (S5 dip switch 2 through 5)
NOTICE
Factory set. Do not adjust. Otherwise, the unit will not operate correctly.
S5 dip switch 2 through 5 allows for rells during the freeze cycle.
The KMS-830MLH does not rell.
D. Control Switch
Thecontrolswitchhasthreepositions:"OFF"forpoweroff,"ICE"foricemaking,and
"WASH"toenergizethepumpmotorwhencleaningandsanitizing.