Instruction Manual
Table Of Contents
- Important Safety Information
- I. Specifications
- II. Installation and Operating Instructions
- III. Maintenance
- IV. Preparing the Icemaker for Periods of Non-Use
- V. Disposal
12
C. How to Remove Panels
1. Icemaker
• Front Panel: Loosen the screw. Lift up and towards you.
• Control Box Cover: Remove the screws and pull towards you.
• Top Panel: Lift off.
• Top Insulation and Top Cover: Lift off.
• Right Side Panel: Remove the screw. Slide forward slightly and lift off.
• Insulation Panel: Remove the thumbscrew. Lift up slightly and pull towards you.
2. Remote Condensing Unit
• Top Panel: Remove the screws and lift off.
• Side Panels: Remove the screws and lift off.
• Louver Panel: Remove the screws and lift off.
• Front Frame: Remove the screws and lift off.
• Control Box Cover: Remove the screws and lift off.
Insulation Panel
Fig. 4
Right Side Panel
Fig. 3
Top Panel
Front Panel
Icemaker
Top Insulation
Top Cover
Top Panel
Right Side Panel
Louver Panel
Left Side Panel
Remote Condensing Unit
Control Box
Cover
Front Frame
Control Box Cover