Specifications Sheet

SERENITY SERIES CUBER ICE MACHINE
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
§
approximate size in inches, image not to scale
Features
Remote Air-Cooled
Shown on optional
Lancer 30” Dispenser
KMS-2000MLJ
Individual crescent cube
Stainless steel evaporator
CycleSaver
TM
design
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 187-253V
‡
Operating Limits-
• Icemaker Water Supply Line: Minimum 3/8” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent
• Allow 24” (61 cm) clearance in both front and rear for proper
air circulation and ease of maintenance/service.
• For best performance the Remote Condenser should not be
more than 33 feet above the icemaker or no more than 10 feet
below it. These distances are measure from fitting to fitting.
Plumbing-
• Allow 6” (15 cm) clearance at rear, sides, and top for
proper air circulation and ease of maintenance and/or
service should they be required.
• Panels easily removed and all components
accessible for service.
Service-
Hoshizaki reserves the right to change specifications without notice.
Printed in the U.S.A.
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for
warranty in other countries.
Warranty:
KMS-2000MLJ
KMS-2000MLJ
09/12/18
Item # 13462
SRK-20J / SRK-20J3
Remote Unit Dimension
SRK-20J / SRK-20J3
Installation Dimension*
59
3/4
” x 17" x 30"
62” x 21” x 45”
*Dimensions include legs
KMS-2000MLJ KMS-2000MLJ
KMS-2000MLJ
Service-
SRK-20J(3)
‡
Voltage supply for KMS Ice Maker is
supplied from the SRK Remote Condenser
• Up to 1938 lbs. of ice production per 24 hours
• Durable stainless steel exterior
• Protected by H-GUARD Plus
Antimicrobial Agent
• EverCheck
TM
alert system
• No heat, less noise
• CFC / HFC Free Foam
• R-404A Refrigerant
• Not recommmended for side-by-side application
®
1
1/2
”
1/2
”
1
1/8
”
KM Edge Cube Dimensions
§
Air / Water Temp
Lbs. per 24 hours
Condenser
Model
70°/ 50°F 90°/ 70°F
ICE PRODUCTION
Potable
Gal. per 100 lbs.
Condenser
Gal. per 100 lbs.
Net / Ship
Weight (lbs.)
Voltage
WATER USAGE
90°/ 70°F 90°/ 70°F
ELECTRICAL
90°/ 70°F
kWh Used
per 100 lbs.
1926
KMS-2000MLJ with SRK-20J
1850
4.5
4.3
20.0
20.0
N/A
N/A
171 / 206208-230V/60/1*
Remote
25’ Length
Condenser
Model
LINE SETS - Brazing Required
35’ Length
55’ Length
Max. Fuse Size
or HACR
Circuit Breaker
Heat
Rejection
BTU/hr.
Voltage
ELECTRICAL
Ambient
Amperage
SRK-20J
HS-0243
†
HS-0244
†
-20 - 122°
HS-0245
†
30A
31,200208-230V/60/1
Remote
23.3A
SRK-20J3
30A 31,200208-230V/60/3
Remote
13A
(Outdoor Use)
-20 - 122°
Voltage
Range
187-253VAC
187-253VAC
TEMP RANGE
†
Line sets require refrigerant.
‡
If neutral is not available transformer kit (HS-5030) is required. Refer to instruction manual for installation and electrical requirements. See instruction manual for wiring diagram.
Remote
1938 1900 208-230V/60/3* 171 / 206
KMS-2000MLJ with SRK-20J3
HS-0243
†
HS-0244
†
HS-0245
†
* Voltage supply for KMS Ice Maker is
supplied from the SRK Remote Condenser
Circuit
Wires
(including ground)
4
4
‡
Refrigerant
Charge Amount
Net / Ship
Weight (lbs.)
280 / 325
283 / 328
Refrigerant
Charge Amount
7.1 oz.
7.1 oz.
26 lb. 14.3 oz.
26 lb. 14.3 oz.
Power cord not included. Must be hard-wired at site.
Circuit
Wires
(including ground)
4
4
‡
Volume:
33.25” x 30.75” X 39.75” 23.52ft
3
Shipping: (LxWxH)
30” x 24” x 32
7/8
”
W x D x H
Modular Head Unit