Instructions Manual
Table Of Contents
- Important Safety Information
- I. Specifications
- II. Installation and Operating Instructions
- III. Maintenance
- IV. Preparing the Appliance for Periods of Non-Use
- V. Disposal
26
8) Replace the drain plug in its correct position. Be careful not to cross thread the drain
plug.
9) Clean the dispenser unit/ice storage bin liner using a neutral cleaner. Rinse thoroughly
after cleaning.
10) Move the control switch to the "ICE" position.
11) Replace the side insulation, left side, top, apron, and front panels in their correct
positions.
12) Turn on the power supply to start the automatic icemaking process.
13) To conrm bin control operation, hold ice in contact with the bin control thermostat bulb.
If the icemaker does not stop within 10seconds, the bin control thermostat must be
adjusted. Installations at higher altitude locations are more likely to require adjustment.