Instruction Manual
Table Of Contents
- Important Safety Information
- I. Specifications
- II. Installation and Operating Instructions
- III. Maintenance
- IV. Preparing the Icemaker for Periods of Non-Use
- V. Disposal
12
D. Setup
1. Ice Storage Bin and Icemaker Setup
WARNING
The installer must ensure the dispenser unit/ice storage bin is compatible with
the icemaker, and the dispenser unit/ice storage bin and icemaker are properly
attached and secured.
1) Unpack the ice storage bin and attach the 4 adjustable legs provided (bin accessory) to
the bottom of the ice storage bin.
2) Position the dispenser unit/ice storage bin in its permanent location.
3) If required, install an adapter kit or top kit. Contact your local Hoshizaki distributor for
recommendations.
4) Level the dispenser unit/ice storage bin in both the left-to-right and front-to-rear
directions. Ifusing an ice storage bin, adjust the ice storage bin legs to level.
5) Place the icemaker on top of the dispenser unit/ice storage bin.
6) Follow the ice storage bin, adapter kit, or top kit instructions for securing the icemaker.
If no instructions are available, secure the icemaker using the 2mounting brackets and
the bolts provided. See Fig.2.
Fig. 2
Mounting Brackets
Bolts
Icemaker
Ice
Storage
Bin