Specifications Sheet

MODULAR CRESCENT CUBER
KMD-530M_H
03/31/17
Item0 # 13350
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
* approximate size in inches, image not to scale
Features
• Up to 560 lbs. of ice production per 24 hours
• Ice on beverage design
• Durable stainless steel exterior
• Protected by H-Guard Plus
Antimicrobial Agent
• EverCheck
TM
alert system
• Removable air filters (Air-cooled model only)
• Front air inlet panels available for side-by-side
application (used with HS-5065)
• R-404A Refrigerant
Air-Cooled
Shown on optional
Lancer 30” Dispenser
KMD-530MAH
Individual crescent cube
Stainless steel evaporator
CycleSaver
TM
design
TM
TM
Available on Bins:
B-1150SS
B-1300SS
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104 - 127V
Operating Limits
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard
Pipe or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 1/4” Nominal ID
Hard Pipe (open drain system) or Copper Water Tubing
(closed loop system) or Equivalent
Plumbing
• Panels easily removed and all components accessible
for service.
• For proper air circulation and ease of maintenance/service,
allow 6” (15 cm) clearance at rear, sides, and top for air,
water, and remote models. Allow 12” (30 cm) clearance at
right side for air-cooled models.
Service
30" x 24
1/4
" x 22
1/8
"
W x D x H
Hoshizaki reserves the right to change specifications without notice.
®
B-250PF
B-500PF/SF
Top kit may be required. See Bin Spec Sheets.
Printed in the U.S.A.
Water-Cooled
KMD-530MWH
Remote Air-Cooled
KMD-530MRH
Air / Water Temp
Lbs. per 24 hours
Condenser
Model
70°/ 50°F 90°/ 70°F
ICE PRODUCTION
Per Cycle
Lbs. Cubes
Potable
Gal. per 100 lbs.
Condenser
Gal. per 100 lbs.
Max. Fuse Size
or HACR
Circuit Breaker
Heat
Rejection
BTU/hr.
Shipping
Weight
Voltage
ENERGY
STAR
®
WATER USAGE
90°/ 70°F 90°/ 70°F
ELECTRICAL
90°/ 70°F
kWh Used
per 100 lbs.
Amperage
553
540
560
KMD-530MAH
KMD-530MWH
KMD-530MRH
Water-Cooled
462
520
488
9.3
10
9.6
432
432
432
5.7
4.4
5.8
17.1
20.9
16.5
N/A
102
N/A
20A
20A
20A
Remote Air-Cooled
6,800
7,080
7,800
170 lbs.
170 lbs.
170 lbs.
115/60/1
115/60/1
115/60/1
Air-Cooled
12A
10.5A
12A
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for
warranty in other countries.
Warranty:
B-800PF/SF
B-900PF/SF
BD-500PF/SF
B-700PF/SF
KMEdge
SERIES
KMD-530M_H
1
1/2
”
1/2
”
1
1/8
”
KM Edge Cube Dimensions*