Spec Sheet

MODULAR CRESCENT CUBER
KMD-460M_J
03/29/19
Item # 13503
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
• Up to 489 lbs. of ice production per 24 hours
• 24” depth perfect for beverage dispensers
• Durable stainless steel exterior
• Protected by H-Guard Plus
Antimicrobial Agent
• EverCheck
TM
alert system
• Removable air filters (air-cooled model only)
• Front air inlet panels available for side-by-side
application (used with HS-5065 kit)
• R-404A Refrigerant
TM
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104-127V
Operating Limits
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or
Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard
Pipe (open drain system) or Copper Water Tubing (closed loop
system) or Equivalent
Plumbing
Service
30" x 24
1/4
" x 22
1/8
"
W x D x H
Hoshizaki reserves the right to change specifications without notice.
®
Air-Cooled
Shown on optional
Lancer 30” dispenser
KMD-460MAJ
Also available on Bins:
B-250PF
B-500PF/SF
Top kit is required. See Bin Spec Sheets.
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory
for warranty in other countries.
Warranty:
Water-Cooled
KMD-460MWJ
BD-500PF/SF
B-700PF/SF
B-800PF/SF
B-900PF/SF
B-1150SS
B-1300SS
• Panels easily removed and all components accessible
for service.
• Allow 6” (15 cm) clearance at rear, left side, and top and
12” (30 cm) clearance at right side for air-cooled model.
Allow 6” (15 cm) clearance at rear, sides, and top for
water-cooled model.
489
487
KMD-460MAJ
KMD-460MWJ
Air
400
472
15.9
17.2
N/A
103
5.48
4.16
15A
15A
Water
6,400
6,600
130 / 170
130 / 170
115V/60/1
115V/60/1
Air / Water Temp
Lbs. per 24 hours
Condenser
Model
70°/ 50°F 90°/ 70°F
ICE PRODUCTION
Potable
Gal. per 100 lbs.
Condenser
Gal. per 100 lbs.
Max. Fuse Sz
or HACR
Circuit Bkr
Heat
Rejection
BTU/hr.
Voltage
WATER USAGE
90°/ 70°F 90°/ 70°F
ELECTRICAL
90°/ 70°F
kWh Used
per 100 lbs.
Amperage
10.0A
8.5A
Circuit
Wires
(including ground)
3
3
Net / Ship
Weight (lbs.)
Refrigerant
Charge Amount
1 lb. 5.2 oz.
14.1 oz.
KMD-460M_J
Features
Individual crescent cube
Stainless steel evaporator
CycleSaver
TM
design
TM
Volume:
33
3/4
” x 33
1/4
” X 27
5/8
” 17.94ft
3
Shipping: (LxWxH)
Power cord not included
* approximate size in inches, image not to scale
KM Edge Cube Dimensions
*
1
1/2
”
1/2
”
1
1/8
”