Spec Sheet

MODULAR CRESCENT CUBER
KMD-410M_J
06/05/19
Item # 13547
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
• Up to 449 lbs. of ice production per 24 hours
• Durable stainless steel exterior
• EverCheck
TM
alert system
• Removable air filters (air-cooled model only)
• Designed specifically for use on ice and
beverage dispener (pictured with a Lancer 22” model)
• R-404A Refrigerant
TM
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104-127V
Operating Limits
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water
Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or
Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 1/4” Nominal ID Copper Water
Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard Pipe
(open drain system) or Copper Water Tubing (closed loop system) or
Equivalent
Plumbing
Service
22
1/4
" x 24
1/8
" x 24"
W x D x H
Hoshizaki reserves the right to change specifications without notice.
Air-Cooled
Shown on optional
Lancer 22” dispenser
KMD-410MAJ
Also available on Bins:
B-250PF
BD-300PF/SF
Top kit is required. See Bin Spec Sheets.
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory
for warranty in other countries.
Warranty:
Water-Cooled
KMD-410MWJ
B-500PF/SF
B-700PF/SF
DB-130H
• Panels easily removed and all components accessible
for service.
• For proper air circulation and ease of maintenance/service,
allow 6” (15 cm) clearance at rear, left side, and top and
12” (30 cm) clearance at right side for both air-cooled and
water-cooled models.
418
449
KMD-410MAJ
KMD-410MWJ
Air
351
436
23.7
22.9
N/A
108
5.7
4.1
20A
20A
Water
5,500
6,300
126 / 161
128 / 163
115V/60/1
115V/60/1
Air / Water Temp
Lbs. per 24 hours
Condenser
Model
70°/ 50°F 90°/ 70°F
ICE PRODUCTION
Potable
Gal. per 100 lbs.
Condenser
Gal. per 100 lbs.
Max. Fuse Sz
or HACR
Circuit Bkr
Heat
Rejection
BTU/hr.
Voltage
WATER USAGE
90°/ 70°F 90°/ 70°F
ELECTRICAL
90°/ 70°F
kWh Used
per 100 lbs.
Amperage
8.2A
6.6A
Circuit
Wires
(including ground)
3
3
Net / Ship
Weight (lbs.)
Refrigerant
Charge Amount
1 lb. 0.9 oz.
14.1 oz.
KMD-410M_J
Features
Individual crescent cube
Stainless steel evaporator
CycleSaver
TM
design
TM
Volume:
33
3/4
” x 33
1/4
” X 27
5/8
” 17.94ft
3
Shipping: (LxWxH)
Power cord not included
* approximate size in inches, image not to scale
KM Edge Cube Dimensions
*
1
1/2
”
1/2
”
1
1/8
”
Please refer to water filter spec sheet for recommended configurations.
Water Filter
B-800PF/SF
B-900PF/SF