Instructions

8
C. Location
NOTICE
1. This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within 45°F to 100°F (7°C to 38°C); Normal
operating water temperature should be within 45°F to 90°F (7°C to 32°C).
Operation of the icemaker, for extended periods, outside of these normal
temperature ranges may affect icemaker performance.
Fig. 1
Top Insulation
Front Insulation
Front Panel
Side Panel
Screws
Screw
Top Panel
B. How to Remove Panels
- See Fig. 1
• Front Panel: Loosen the screws. Lift up and towards you.
• Top Panel: Lift up at front slightly, push rearward and lift off.
• Side Panel (R): Remove the screw. Slide forward slightly and lift off.
• Front Insulation: Lift up slightly, and pull towards you.
• Top Insulation: Push up at front corner, and pop off.
Side Frame