Instructions

11
NOTICE
Make sure the bin control is securely in place. Otherwise, ice may get
between gaps and damage the bin control.
8) Pull up any slack in the bin control lead, then put the bushing attached to the bin
control lead back into the hole in the base.
9) Connect the bin control connector to the side of the control box.
10) Make sure the right and left defl ectors are in their correct positions with the slotted
holes engaged on the collars. Make sure the right and left defl ectors are secured with
the thumbscrews.
7) While pulling up the bin control lead,
hook the bin control on the right side
interior wall. Then push the bin control
up against the bottom of the unit, and
slide to the back until it snaps in place.
Make sure the slotted holes at the right
side of the bin control are securely
placed on the collars at the bottom of
the unit. See Fig. 6.
Fig. 6
Bin Control
Collars
Left Defl ector
Right Defl ector Thumbscrew
Thumbscrew
Collars
Collars
(Behind Left Defl ector)
Fig. 7