Instructions

9
2. This icemaker will not work at sub-freezing temperatures. To prevent
damage to the water supply line, drain the icemaker when the air
temperature is below 32°F (0°C). See “III. C. Preparing the Icemaker for
Long Storage.”
For best operating results:
• Icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
• Avoid choosing a site where no dripping is allowed.
• Allow 6” (15 cm) clearance at rear, left side, and top and 12” (30 cm) clearance at right
side for proper air circulation and ease of maintenance and/or service should they be
required.
• Location should provide a fi rm and level foundation for the equipment.
D. Setup
NOTICE
Do not use the side frame to lift the icemaker. See Fig. 1. Lift the icemaker
from the base.
1) If mounting the unit on top of a storage bin, unpack the storage bin, and attach the four
adjustable legs provided (bin accessory) to the bottom of the storage bin. If mounting
the unit on top of a dispenser, follow the dispenser’s setup procedure.
2) Position the storage bin/dispenser unit in the selected
permanent location.
3) Place the icemaker on top of the storage bin/dispenser unit
by holding the bottom.
4) Secure the icemaker to the storage bin/dispenser unit using
the two mounting brackets and the bolts provided. See Fig. 2.
5) Level the icemaker and storage bin/dispenser unit in both
the left-to-right and front-to-rear directions. If using a storage
bin, adjust the storage bin legs to make the icemaker level.
6) Replace the panels in their correct positions.
Fig. 2
Bin
Bolts
Mounting
Brackets
Icemaker