User's Manual

11) Replace the water tank, cube guide, pump motor bracket, pump motor and ﬂ oat switch

in their correct positions until they snap in place.

NOTICE

Be sure to let the discharge hose pass behind the copper tube and connect it securely

in position. See Fig. 3. Otherwise, the discharge hose may be caught in the front

insulation, leading to improper results.

12) Secure the pump motor bracket with the two thumbscrews.

13) Reconnect the pump motor connector and ﬂ oat switch connector.

14) Replace the front insulation and front panel in their correct positions.

Left Deﬂ ector

Right Deﬂ ector Thumbscrew

Thumbscrew

Collars

(Behind Left Deﬂ ector)

Fig. 7