User's Manual

6) Route the bin control lead through the hole in the base, then into the bushing provided.

See Fig. 5.

Fig. 6

Bin Control

Collars

Fig. 5

Bushing

Bin Control Lead

7) While pulling up the bin control

lead, hook the bin control on

the right side interior wall. Then

push the bin control up against

the bottom of the unit, and

slide to the back until it snaps

in place. Make sure the slotted

holes at the right side of the bin

control are securely placed on

the collars at the bottom of the

unit. See Fig. 6.

NOTICE

Make sure the bin control is securely in place. Otherwise, ice may get between gaps

and damage the bin control.

8) Pull up any slack in the bin control lead, then put the bushing attached to the bin

control lead back into the hole in the base.

9) Connect the bin control connector to the side of the control box.

10) Make sure the right and left deﬂ ectors are in their correct positions with the slotted

holes engaged on the collars. Make sure the right and left deﬂ ectors are secured with

the thumbscrews. See Fig. 7.