Specifications Sheet

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
BOTTOM VIEW REAR VIEW
SIDE VIEW
FRONT VIEW
Printed in the U.S.A.
REMOTE AIR-COOLEDWATER-COOLEDAIR-COOLED
Front
Voltage supply for the URC Remote
Condenser is supplied from the
Ice Maker. No addtional circuit is
required.
Pre-Charged Tubing Kits
(Sold Separately)
20' R404-2046-2
35' R404-3546-2
URC-5F Remote Condenser (Sold Separately)
(W x D x H) 21
13/16
x 14
1/16
x 32
13/16
For Use with KM-520MRJ and KM-660MRJ
Air Flow
URC-5F
2 1/2
1 3/4
1/4 Liquid
Refrigerant Line
Electrical
Conduit
Access
3
21
13/16
14 1/16
32 13/16
17 1/4
21
3/16
17 7/8
3/8 Discharge Line
KM-350/520/660M_J
SLIM-LINE MODULAR CRESCENT CUBER
Front
KM-350/520/660M_J
08/31/18
Item # 13260
Louvers on Air-Cooled
models only
Louvers on Air-Cooled
models only
Louvers on Air-Cooled
models only
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104 - 127V
Operating Limits
Service
• Panels easily removed and all components
accessible for service.
• Removable/cleanable air filters. (Air-cooled model only)
• Allow 6” (15 cm) clearance at rear, sides, and top for
proper air circulation and ease of maintenance/service.
KM Edge Cube Dimensions
†
†
approximate size in inches, image not to scale
1
1/2
”
1/2
”
1
1/8
”
• Icemaker water supply line: minimum 1/4” nominal ID copper water
tubing or equivalent
• Icemaker drain line: minimum 3/4” nominal ID hard pipe or equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser water supply line: minimum 1/4” nominal ID copper water
tubing or equivalent
• Condenser drain/return line: minimum 1/4” nominal ID hard pipe
(open drain system) or copper water tubing (closed loop system) or
equivalent
Plumbing
Please refer to water filter specification sheet for recommendations.
Water Filter