Instruction Manual
Table Of Contents
- Important Safety Information
- I. Specifications
- A. Electrical and Refrigerant Data
- B. Dimensions/Connections
- 1. Air-Cooled Models (SAJ/3)
- 2. Water-Cooled Models (SWJ/3)
- 3. Remote Models KM-1301SRJ/3 and KM-1601SRJ/3
- 4. Remote Models KM-1900SRJ/3, KM-2200SRJ/3, and KM-2600SRJ/3
- 5. Remote Condenser Unit URC-14F (use with KM-1301SRJ/3)
- 6. Remote Condenser Unit URC-22F (use with KM-1601SRJ/3, KM-1900SRJ/3, KM‑2200SRJ3) and URC-26J (use with KM-2600SRJ3)
- II. Installation and Operating Instructions
- III. Maintenance
- IV. Preparing the Icemaker for Periods of Non-Use
- V. Disposal
43
4) Attach a compressed air or carbon dioxide supply to the condenser water supply line
drain valve.
5) Open the water regulating valve by using a screwdriver to pry up on the spring retainer
underneath the spring. While holding the valve open, blow out the condenser using the
compressed air or carbon dioxide supply until water stops coming out.
6) Close the drain valve(s).
7) Replace the right side panel, top panel, and front panel in their correct positions.