Specifications Sheet

Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
* approximate size in inches, image not to scale
Features
Air-Cooled
Shown on optional bin B-900
KM-1301SAJ-E
Individual crescent cube
Stainless steel evaporator
CycleSaver
TM
design
TM
• Ambient Temp Range 7 - 38°C
• Water Temp Range 7 - 32°C
• Water Pressure 69 - 779KPa
• Voltage Range 198-254V
Operating Limits
• Panels easily removed and all components
accessible for service.
• Allow 15cm (6”) clearance at rear, sides, and top for
proper air circulation and ease of maintenance/
service.
Service
W x D x H
Hoshizaki reserves the right to change specifications without notice.
KMEdge
DESIGN
38mm
29mm
13mm
KM Edge Cube Dimensions*
Please refer to water filter spec sheet for recommended configurations.
Water Filter
Call factory for warranty information.
Warranty:
624
KM-1301SAJ-E
Air
501
132 N/A
4.52
20A
16,100 136 / 154
220-240/50/1
Condenser
Model
ICE PRODUCTION
Heat
Rejection
BTU/hr.
Voltage
WATER USAGE ELECTRICAL
Amperage
11.35A
Circuit
Wires
(including ground)
3
Refrigerant
Charge Amount
1900g
Air / Water Temp
kg per 24 hours
21°/ 10°C 32°/ 21°C
Potable
liters per 45 kg
Condenser
liters per 45 kg
32°/ 21°C 32°/ 21°C
32°/ 21°C
kWh Used
per 45 kg
Net / Ship
Weight (kg)
Min. Circuit
Amp - Max.
Fuse/Breaker
1219 x 695 x 695 mm
Volume:
1312 x 845 x 829 mm 0.919m
3
Shipping: (LxWxH)
KM-1301SAJ-E
MODULAR CRESCENT CUBER
KM-1301SAJ-E
09/27/18
Item # 13191
• Up to 624 kg. of ice production per 24 hours
• Stackable for 1248 kg. per 24 hours ice production
in the same floor space
• Durable stainless steel exterior
• Protected by H-Guard Plus
Antimicrobial Agent
• EverCheck
TM
alert system
• Removable air filters (Air-cooled model only)
• R-404A Refrigerant
TM
®
Available on Bins:
B-1500SS
B-1650SS
B-800
B-900
Top kit may be required.
See Bin Spec Sheets.
B-1150SS
B-1300SS
• Icemaker Water Supply Line: Min. 10 mm Nominal OD
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Min.18 mm Nominal OD Hard Pipe
or Equivalent
Plumbing
COMPONENT
Power cord not included. Must be hard-wired at site.