Instruction Manual

D. Setup
1. Ice Storage Bin and Icemaker Setup
WARNING
• Do not use the frame to lift the appliance. Lift the appliance from the base.
• The installer must ensure the ice storage bin is compatible with the icemaker, and
the ice storage bin and icemaker are properly attached and secured.
1) Unpack the storage bin, and attach the four adjustable legs provided (bin accessory) to
the bottom of the storage bin.
2) Position the storage bin in the selected permanent location.
3) Unpack the appliance and remove all shipping cartons, tape and packing material.
4) Remove the panels to prevent damage when installing the appliance. See “II. B. How to
Remove Panels.”
5) Remove the protective plastic lm from the panels. If the unit is exposed to the sun or
to heat, remove the lm after the unit cools. NOTICE! Do not use the side frame to lift
the icemaker. See Fig. 1. Lift the icemaker from the base.
6) Remove the package containing the accessories. See Fig. 1.
7) Remove the shipping tape holding the bin control switch. See Fig. 1.
8) Place the icemaker on top of storage bin.
9) Secure the icemaker to the storage bin using the two mounting brackets and the bolts
provided. See Fig. 2.
10) Level the icemaker and ice storage bin in both the left-to-right and front-to-rear
directions Adjust the ice storage bin legs to make the icemaker level.
Icemaker
Bin
Mounting Brackets
& Bolts
Fig. 2
10