Instruction Manual

8
B. How to Remove Panels
- See Fig. 1
• Front Panel: Loosen the screw. Lift up and pull towards you.
• Top Panel: Remove the screws and lift up.
• Left Side Panel: Slide forward slightly, and then lift off.
• Right Side Panel: Remove the screws and pull towards you.
C. Location
NOTICE
1. This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within 45°F to 100°F (7°C to 38°C); Normal
operating water temperature should be within 45°F to 90°F (7°C to 32°C).
Operation of the icemaker, for extended periods, outside of these normal
temperature ranges may affect icemaker performance.
2. This icemaker will not work at sub-freezing temperatures. To prevent
damage to the water supply line, drain the icemaker when the air
temperature is below 32°F (0°C). See “III. C. Preparing the Icemaker for
Long Storage.”
Fig. 1
Screw
Screw
Screw
Screw
Top Panel
Left Side Panel
Right Side Panel
Shipping Tape
Accessories
Front Panel