Instruction Manual

17
9) Turn on the power supply to start the sanitizing process.
10) Turn off the power supply after 15 minutes.
11) Open the icemaker water supply line shut-off valve. See Fig. 4.
12) Remove the front panel.
13) Move the control switch to the “ICE“ position.
14) Replace the front panel.
15) Turn on the power supply for 3 minutes. The water tank drains.
16) Turn off the power supply.
17) Repeat steps 15 and 16 three more times to rinse thoroughly.
18) Repeat steps 1 through 17 one more time.
19) Remove the front panel.
20) Remove the screw, then move the water tank drain pipe to the normal position. See
Fig. 5. Use the screw to secure the water tank drain pipe in the normal position.
21) Replace the front panel.
22) Clean the storage bin liner using a neutral cleaner. Rinse thoroughly after cleaning.
23) Turn on the power supply to start the automatic icemaking process.
B. Maintenance
This icemaker must be maintained individually, referring to the instruction manual and
labels provided with the icemaker.
WARNING
1. Only qualifi ed service technicians should service this icemaker.
2. Move the control switch to the “OFF” position and turn off the power supply
before servicing. Lockout/Tagout to prevent the power supply from being
turned back on inadvertently.