Instruction Manual

15
WARNING
1. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
2. Carefully follow any instructions provided with the bottles of cleaning and
sanitizing solution.
3. Always wear liquid-proof gloves and goggles to prevent the cleaning and
sanitizing solutions from coming into contact with skin or eyes.
NOTICE
To prevent damage to the water pump, do not leave the control switch in the
“WASH” position for extended periods of time when the water tank is empty.
1. Cleaning Procedure
1) Dilute approximately 7.2 fl. oz. (214 ml) of recommended cleaner Hoshizaki “Scale
Away” with 0.8 gal. (3.0 lit.) of water.
2)
Turn off the power supply.
3)
Remove all ice from the storage bin.
4) Remove the front panel.
5) Remove the screw, then move the water
tank drain pipe to the drain position. See
Fig. 5. Use the screw to secure the water
tank drain pipe in the drain position.
6) Make sure the control switch is in the “ICE”
position, then replace the front panel.
7) Close the icemaker water supply line shut-
off valve. See Fig. 4.
8) Turn on the power supply for 3 minutes. The
water tank drains and cubes are removed
from the evaporator.
9) Turn off the power supply.
10) Remove the front panel and top panel.
Fig. 5
[Normal Position]
[Drain Position]
Screw
Tank Drain
Pipe