Instruction Manual

9
For best operating results:
• Icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
• Avoid choosing a site where no dripping is allowed.
• Allow 6” (15 cm) clearance at rear, left side, and top and 12” (30 cm) clearance at right
side for proper air circulation and ease of maintenance and/or service should they be
required.
• Location should provide a fi rm and level foundation for the equipment.
D. Setup
NOTICE
Do not use the frame to lift the icemaker. Lift the icemaker from the base.
1) Unpack the storage bin, and attach the four adjustable legs provided (bin accessory) to
the bottom of the storage bin.
2) Position the storage bin in the selected permanent location.
3) Unpack the icemaker and remove all shipping cartons, tape and packing material.
4) Remove the panels to prevent damage when installing the icemaker. See “II. B. How to
Remove Panels.”
5) Remove the protective plastic fi lm from the panels. If the unit is exposed to the sun or
to heat, remove the fi lm after the unit cools.
6) Remove the package containing the accessories from
the icemaker. See Fig. 1.
7) Remove the shipping tape holding the bin control
switch. See Fig. 1.
8) Place the icemaker on top of storage bin.
9) Secure the icemaker to the storage bin using the two
mounting brackets and the bolts provided. See Fig. 2.
Icemaker
Bin
Mounting Brackets
& Bolts
Fig. 2