Service Manual
Table Of Contents
- Important Safety Information
- I. Construction and Water/Refrigeration Circuit Diagram
- II. Sequence of Operation and Service Diagnosis
- III. Controls and Adjustments
- IV. Refrigeration Circuit and Component Service Information
- V. Maintenance
- VI. Preparing the Appliance for Periods of Non-Use
- VII. Disposal
- VIII. Technical Information
21
Large-Hole Cubes - Possible Cause (Also see III.G.1. Dimple Diameter")
1. Condenser a) Dirty condenser or air lter.
2. Fan Motor a) Defective.
3. Refrigerant Charge a) Low.
Large-Hole Cubes - Possible Cause (Also see III.G.1. Dimple Diameter")
4. Icemaker Location a) Insufficient clearance.
b) Ambient temperature too high.
5. Water Supply a) Water leaks.
b) Improper water pressure.
Cloudy Cubes - Possible Cause
1. Water Quality a) High hardness. See "III.G.2. Ice Clarity."
2. Slush Ice a) Use Anti-Slush Control (Control Board Settings 50 and 51).