Instruction Manual

14) Allow the appliance to operate for 3 minutes to drain the water tank and then remove
the front panel.
15) Move the control switch to the "OFF" position. After 5 seconds, move the control switch
to the "ICE" position and then replace the front panel.
16) Repeat steps 14 and 15 three more times to rise thoroughly.
17) Repeat steps 1 through 16 one more time.
18) Remove the front panel and then move the control switch to the "OFF" position. Unplug
the appliance.
19) Remove the top panel, top insulation, top sheet, front frame, and front sheet.
20) Remove the screw and then move the water tank drain pipe to the normal position.
See Fig. 5. Use the screw to secure the water tank drain pipe in the normal position.
21) Replace the front sheet, front frame, top sheet, top insulation, and top panel.
22) Clean the ice storage bin liner using a neutral cleaner. Rinse thoroughly after cleaning.
23) Plug in the appliance. Move the control switch to the "ICE" position and then replace the
front panel to start the automatic icemaking process.
21