Instruction Manual
1. Plug in the electrical cord of the unit to a wall outlet, following the
recommendaons about electrical installaon in this manual.
2. Allow the appliance to cool down to setpoint before loading with
product.
3. When placing products in the cooler, you should leave small gaps
between one and the other to assure free circulaon of air inside the
cabinet.
4. Do not leave the door open for extended periods of me, to avoid
increased temperature of the products.
The temperature of a cooler should be between 34°F to 40°F.
START UP THE COOLER
INSTALLING THE SHELVES
WARNING
Never try to move a loaded shelf, remove everything from the shelf
before moving. Use both hands when moving the shelf.
To add or remove a shelf
Remove stored product from the shelf. Do not try to remove a loaded
shelf from the appliance. Grasp the shelf front with both hands, rotate
the front upward and li out. Shelves and shelf clips are packed inside
the cabinet prior to shipment. Aer selecng the appropriate spacing
inside the cabinet, install shelf clips by inserng top of clip inside the
pilaster and then press the lower secon of the clip while pushing
inwards unl it snaps into place. Repeat unl all clips are in desired
locaon. Place shelf on clips checking that all four corners of shelves
are leveled and supported by the four shelf clips.
Loading ps and suggesons
Your appliance is equipped with a shelf system, composed of three
reinforced heavy duty shelves and twelve shelf clips (four per shelf), which
provides maximum adjustability.