Instruction Manual
HANDLING THE CABINET
1. Always move the unit in an upright posion. Do not set it on its side
or upside down as you may damage the cabinet and cause the oil to
migrate from the compressor.
2. If liing the unit, hold it from its base. It is recommended to use a dolly.
3. Do not let the unit fall abruptly.
4. Appliance is heavy. Use care when liing or posioning. Work in pairs
when needed to prevent injury or damage.
5. Do not li using the doors.
LOCATION
Select locaon
The proper locaon will ensure peak performance of your appliance. We
recommend a locaon where the unit will be out of direct sunlight and
away from heat sources. To ensure your product performs to specicaons,
the recommended installaon locaon temperature range is from 55 to
115° F (13 to 46°C).
Cabinet clearance
Venlaon is required from the boom front of the appliance. Keep this
area open and clear of any obstrucons. Adjacent cabinets and counter
top can be installed around the appliance as long as the front grille
remains unobstructed.
Front Grille
Do not obstruct the front grille. The openings within the front grille allow
air to ow through the condenser heat exchanger. Restricons to this air
ow will result in increased energy usage and loss of cooling capacity.
For this reason it is important this area not be obstructed and the grille
openings kept clean. It is not recommend the use of a custom made grille
as air ow may be restricted.
The base of the refrigerator has heavy duty leveling legs underneath so the cabinet
may be leveled appropriately and to allow room to clean beneath the cabinet.
Level the cabinet front to back and side to side with a level by using the adjustable
poron of the leveling legs.
LEVEL THE CABINET
Leveling leg
Cut the plasc straps.
REMOVE THE CRATE AND SKID
FIG. 2