Instruction Manual

C. Air Filter

A plastic mesh air ﬁ lter removes dirt or dust from the

air, and keeps the condenser from getting clogged. If

the filter gets clogged, the showcase’s performance

will be reduced. Check the ﬁ lter at least twice a month.

When clogged, use warm water and a neutral cleaner

to wash the ﬁ lter.

1) Hold the tabs located at the bottom of the louver,

and lift them up to release the louver from the body.

2) Pull the louver toward you.

3) Pull the louver downward.

4) Grasp the frame of the air ﬁ lter, and pull it toward

you.

5) Clean the air ﬁ lter.

6) Reﬁ t the air ﬁ lter and louver in the reverse order of

the removal procedure.

D. Condenser

Check the condenser once a year, and clean if required by using a brush or vacuum

cleaner. More frequent cleaning may be required depending on the location of the

showcase.

E. Checking Ground Fault Circuit Interrupter

Push the test button at least once a month, and simulate a ground fault on the load circuit.

Fig. 6

Louver

Air Filter

Condenser