Service Manual
Table Of Contents
- Important Safety Information
- I. Construction and Water/Refrigeration Circuit Diagram
- II. Sequence of Operation and Service Diagnosis
- III. Controls and Adjustments
- A. Control Board
- B. Controls and Adjustments
- 1. Default Dip Switch Settings
- 2. BC (Infrared Sensor) Shutdown Delay (S1 dip switch 1, 2, 3)
- 3. Drain Frequency Control (S1 dip switch 4)
- 4. Continuous Dispensing Timer (S1 dip switch 5 & 6)
- 5. Bin Control Selector (S1 dip switch 7)
- 6. BC (Mech. Stand-Alone or Backup (only)) Shutdown Delay (S1 dip switch 8)
- 7. Shutdown Sequence (S1 Dip Switch 9)
- 8. Factory Use (S1 Dip Switch 10)
- IV. Refrigeration Circuit and Component Service Information
- V. Maintenance
- VI. Disposal
- VII. Technical Information
9
2. Condensing Unit
a) SRC-10J
Condenser
Receiver
Fan Motors
Headmaster (C.P.R.)
High-Side
Service Valve
Compressor
High-Pressure Switch
Control Low-Pressure Switch
Control Box
Safety Low-Pressure Switch
b) SRC-14J
Right Side Panel
Louver Panel
Left Side Panel
Top Panel
Low-Side
Service Valve
Control Box Cover
Top Panel
Condenser
Headmaster (C.P.R.)
Fan Motor
Compressor
High-Pressure Switch
Control Box
Right Side Panel
Control Box Cover
Receiver
Left Side Panel
Control Low-Pressure
Switch
Safety Low-Pressure
Switch
Louver Panel
Liquid Line
Shutoff Valve
Suction Line
Shutoff Valve
Data Pending