Service Manual
Table Of Contents
- Important Safety Information
- I. Construction and Water/Refrigeration Circuit Diagram
- II. Sequence of Operation and Service Diagnosis
- III. Controls and Adjustments
- A. Control Board
- B. Controls and Adjustments
- 1. Default Dip Switch Settings
- 2. BC (Infrared Sensor) Shutdown Delay (S1 dip switch 1, 2, 3)
- 3. Drain Frequency Control (S1 dip switch 4)
- 4. Continuous Dispensing Timer (S1 dip switch 5 & 6)
- 5. Bin Control Selector (S1 dip switch 7)
- 6. BC (Mech. Stand-Alone or Backup (only)) Shutdown Delay (S1 dip switch 8)
- 7. Shutdown Sequence (S1 Dip Switch 9)
- 8. Factory Use (S1 Dip Switch 10)
- IV. Refrigeration Circuit and Component Service Information
- V. Maintenance
- VI. Disposal
- VII. Technical Information
8
I. Construction and Water/Refrigeration Circuit Diagram
A. Construction
1. Icemaker
Inlet Water Valve
Reservoir
Control Box
Spout
Float Switch
Gear Motor
Thermostatic
Expansion Valve
Ice Chute
BC
(infrared sensor)
Cutter, Extruding Head,
Evaporator
Power Cord
Drain Valve
Liquid Line
Service Valve
Strainer
Front Panel
Right Side
Panel
Top Panel
Drier
Evaporator
Heater
Model Shown: FS-1001MLJ-C
Front View
Rear View
Suction Line
Service Valve
Liquid Line
Shutoff Valve
Suction Line
Shutoff Valve