Instructions Manual

21
III. Maintenance
The appliance must be maintained in accordance with the instruction manual and labels
provided. Consult with your local Hoshizaki Certied Service Representative about
maintenance service. To obtain the name and phone number of your local Hoshizaki
Certied Service Representative, visit www.hoshizaki.com.
WARNING
• Only qualied service technicians should service the appliance.
To reduce the risk of electric shock, do not touch the power switch, control switch,
or plug (on corded models) with damp hands. Make sure the power switch is in
the "OFF" position before plugging in or unplugging the appliance on corded
models.
• Before servicing, move the power switch to the "OFF" position.
Corded Models: Unplug the appliance from the electrical outlet.
Hard-Wired Models: Turn off the power supply. Lockout/Tagout to prevent the
power supply from being turned back on inadvertently.
CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any maintenance is done to the appliance. Make sure that
none have fallen into the ice storage bin.
• Do not place ngers or any other objects into the ice discharge opening.
After service, make sure that there are no wires pinched between the panels and
appliance. Make sure you do not damage or pinch the water supply line, drain
line, or power cord.
Fig. 8
Top Panel
Spout A
Actuator
Shaft
Bin Control Bracket
Proximity Switch
Snap Pin
Spout B
Evaporator Packing
Gasket B
Gasket A
Bin Top Cover
Evaporator
Assembly
Extruding Head
Reservoir
Model Shown: F-500BAJ