Instructions Manual
Table Of Contents
- Important Safety Information
- I. Specifications
- A. Electrical and Refrigerant Data
- 1. F-300BAJ
- 2. F-500BAJ
- B. Dimensions/Connections
- 1. F-300BAJ
- 2. F-500BAJ
- II. Installation and Operating Instructions
- A. Location
- B. Checks Before Installation
- C. How to Remove Panels
- D. Setup
- E. Electrical Connection
- F. Water Supply and Drain Connections
- G. Final Checklist
- H. Startup
- I. Bin Control Check
- J. Alarm Safeties
- III. Maintenance
- A. Maintenance Schedule
- B. Cleaning and Sanitizing Instructions
- IV. Preparing the Appliance for Periods of Non-Use
- V. Disposal
11
C. How to Remove Panels
See Fig. 1
• Top Panel: Remove the screws. Lift up at the front slightly, push rearward, and lift off.
• Front Panel: Remove the screws. Lift up and pull towards you.
Top Panel
Storage Bin
Sliding Door
Front Panel
Fig. 1
D. Setup
1) See Fig. 2. Attach four 6" adjustable legs provided to the bottom of the appliance.
2) Position the appliance in the selected permanent location.
3) Level the appliance from side-to-side and front-to-rear by adjusting the legs.
Fig. 2
Model Shown: F-500BAJ
Model Shown: F-500BAJ