Instruction Manual
Table Of Contents
- Important Safety Information
- I. Specifications
- A. Electrical and Refrigerant Data
- B. Dimensions/Connections
- 1. Air-Cooled Models (MAH/MAJ(-C))
- 2. Water-Cooled Models (MWH(-C))
- 3. Remote Models (MRH/MRJ(3)(-C)) and Low-Side Models (MLH(-C))
- 4. Remote Condenser Unit URC-5F (use with FD-1001MRJ-C)
- 5. Remote Condenser Unit URC-14F (use with F-1501MRH(-C))
- 6. Remote Condenser Unit URC-22F (use with F-2001MRH(3)(-C))
- II. Installation and Operating Instructions
- A. Location
- B. Checks Before Installation
- C. How to Remove Panels
- D. Dispenser Unit/Ice Storage Bin and Icemaker Setup
- E. Electrical Connection
- F. Water Supply and Drain Connections
- G. Installation of Remote Condenser Unit for Remote Models
- H. Connection to an R-404A Parallel Rack System for Low-Side Models
- I. Final Checklist
- J. Startup
- K. Bin Control Check
- L. Alarm Safeties
- III. Maintenance
- IV. Preparing the Icemaker for Periods of Non-Use
- V. Disposal
12
5. Remote Condenser Unit URC-14F (use with F-1501MRH(-C))
Units: mm [in.]
Rear
Top
Icemaker
Model
URC-14F Heat of Rejection
AT 90°F (32°C)
WT 70°F (21°C)
F-1501MRH(-C) 13,194 BTU/hr
NOTICE
Allow 24" (61cm) clearance
at front and rear for proper
air circulation and ease of
maintenance and/or service
should they be required.
Units: mm [in.]
Icemaker
Model
URC-5F Heat of Rejection
AT 90°F (32°C)
WT 70°F (21°C)
FD-1001MRJ-C 8,900 BTU/hr
NOTICE
Allow 24" (61cm) clearance
at front and rear for proper
air circulation and ease of
maintenance and/or service
should they be required.
Rear
Top
4. Remote Condenser Unit URC-5F (use with FD-1001MRJ-C)