Instruction Manual
Table Of Contents
- Important Safety Information
- I. Specifications
- II. Installation and Operating Instructions
- A. Location
- B. Checks Before Installation
- C. How to Remove Panels
- D. Dispenser Unit/Ice Storage Bin and Icemaker Setup
- E. Electrical Connection
- F. Water Supply and Drain Connections
- G. Remote Condenser Unit Installation
- H. Parallel Rack System Connection
- I. Final Checklist
- J. Startup
- K. Bin Control Check
- L. Alarm Safeties
- III. Maintenance
- IV. Preparing the Appliance for Periods of Non-Use
- V. Disposal
13
4. Low Side, Parallel Rack System Models (MLJ(-C))
F-1002MLJ
A 560 [22]
B 555 [21-7/8]
C 395 [15-9/16]
D 658 [25-7/8]
E 598 [23-1/2]
F 575 [22-5/8]
G
169 [6-5/8]
H 24 [1]
I 35 [1-3/8]
J 64 [2-1/2]
K
434 [17-1/16]
L
40 [1-9/16]
M 100 [3-15/16]
Units: mm [in.]
RearSide
Bottom
NOTICE
• Allow 6" (15 cm) clearance at rear
and sides for proper air circulation
and ease of maintenance and/or
service should they be required. Allow
24"(61cm) clearance at top to allow
for removal of the auger.
• The dispenser unit/ice storage bin
opening must accommodate the
bottom opening as in the illustration.
32
[1-1/4]
G