Installation Sheet
Table Of Contents
21
DIXELL ALARM INDICATORS
Mess. Cause Outputs
P1
Room probe failure Compressor output according to CY e Cn
P2
Evaporator probe failure Defrost end is timed
P3
Third probe failure Outputs unchanged
HA
Maximum temperature alarm Outputs unchanged
LA
Minimum temperature alarm Outputs unchanged
H2
Maximum temperature alarm for condenser Outputs unchanged
L2
Minimum temperature alarm for condenser Outputs unchanged
EA
External alarm Outputs unchanged
CA
Serious external alarm All outputs OFF
PA
Pressure switch alarm All outputs OFF
dA
Door open Depends on par. rd
HOW TO SEE THE SET POINT
cuts out.
set point value.
.
HOW TO CHANGE THE SET POINT