Spec Sheet

Cabinet Construction
Door Construction
Refrigeration System
The high efficiency refrigeration system is self-contained with an epoxy electrocoated (E-Coat) evaporator for extended life. Top mounted refrigeration system is easily
accessible for service. The refrigeration system components are assembled on a high density expanded polypropylene platform that is removable from the main unit.
Condensate removal is accomplished with a bottom mounted energy efficient electric evaporation system. A cap tube controls the flow of environmentally friendly
R290 refrigerant through the evaporator. Freezer: Refrigeration system utilizes a time initiated heated defrost to eliminate any ice on the evaporator coil. Refrigerator:
Refrigeration system utilizes a time initiated off cycle defrost to eliminate any ice on the evaporator coil. Solid state digital controls monitor the operation and performance
of the refrigeration system. The controls also provide visual high and low temperature and high and low voltage alarms. A LED display shows the cabinet temperature and
is adjustable to Fahrenheit or Celsius. 115 volt units are equipped with a ten foot cord and plug (20.0 amps or less).
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
PLAN VIEW
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back, bottom and top are constructed of coated steel. The cabinet interior
features stainless steel back, sides, and floor with a stainless steel top. Three heavy duty epoxy coated shelf per section is standard. Mounted on stainless steel pilasters the
shelves are adjustable in 1” increments. Cabinet walls and doors are insulated with 2” of polyurethane insulation that has zero ozone depletion potential (ODP) and less than
one global warning potential (GWP). 4” polyolefin, stem casters (two with brakes) are standard.
Doors are constructed of a high grade stainless steel exterior and interior and are standard with locks. Hoshizaki’s exclusive “stepped” design protects the recessed gasket
while product is being removed from the cabinet. Doors are provided with a one piece, full length extruded aluminum flush mount handle and are mounted on eight (8) gauge
stainless steel hinge plates with a welded hinge pin. Spring assisted self-closing doors are equipped with a stay open feature past 90 degrees. Snap-in magnetic door gaskets
are easily removed for cleaning. Door hinging is field reversible.
55”
3.63”
79.5”
33.5”
79.5”
SIDE VIEW
FRONT VIEW
55”
Refrigerator
Freezer
DT2A-FS
02/21/20
Item # 13557
DT2A-FS
Two Section Dual Temp Upright
59.25”