Service Manual
Table Of Contents
- Important Safety Information
- I. Specifications
- II. General Information
- III. Technical Information
- IV. Service Diagnosis
- V. Removal and Replacement of Components
- A. Service for Refrigerant Lines
- B. Important Notes for Component Replacement
- 1. Upper Bearing Wear Check
- 2. Removal and Replacement of Extruding Head
- 3. Removal and Replacement of Auger
- 4. Removal and Replacement of Evaporator
- 5. Removal and Replacement of Mechanical Seal and Lower Housing
- 6. Removal and Replacement of Gear Motor
- 7. Dispense Auger and Agitator
- 8. Dispense or Agitating Motor
- VI. Cleaning and Maintenance
- VII. Disposal
8
CONTROL
DISPENSE MODE
4A1038-014
ICE
OFF
DRAIN
PORTION
CONTINUOUS
II. General Information
A. Construction
1. Icemaker
Storage Bin
Inlet Water Valve
Reservoir
Control Box
Air-Cooled Condenser
Spout Cover
Evaporator Assembly
Compressor
Dispense Motor
Agitating Motor
Agitator
Ice Dispense
Auger
Dispense Water Valve
Gear Motor
Spout B
Float Switch
Shutter Assembly
Power Switch
Spout A
Thermostatic Expansion Valve
Safety Switch
Bin Control Actuator
Bin Control
Proximity Switch