Specification Sheet

DCM-751B_H-OS
DCM-751BAH-OS
03/31/17
Item # 13291
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
Cubelet Dimensions*
* approximate size in inches, image not to scale
Features
• Up to 801 lbs. of ice production per 24 hours, with
70 lbs.* built-in storage
• 2 second flush cycle every hour
• Easy to chew, cubelet ice
• Self-contained design reducing opportunities for cross
contamination
• Flush cycle removes sediment for cleaner ice
• Protected by H-GUARD Plus
Antimicrobial Agent
• Removable air filters (Air-cooled model only)
• Dispenses ice and water
• R-404A Refrigerant
Air-Cooled
Shown with optional
SD-750 Stand
DCM-751BAH-OS
Durable stainless steel exterior
Advanced CleanCycle24
TM
design
Stainless steel auger with greaseless
bearing
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104 - 127V
Operating Limits
Plumbing
• Allow 6” (15 cm) clearance at rear and sides for
proper air circulation and ease of maintenance/
service should they be required. Allow 24” (61 cm)
clearance at top to allow for removal of the auger
Not intended for outdoor use - avoid placement in direct sunlight.
Service
34
1/16
" x 28
1/2
" x 48
1/16
”*
W x D x H
Hoshizaki reserves the right to change specifications without notice.
Printed in the U.S.A.
*Rated in accordance with AHRI Standard 820 (I-P)
Warranty:
3 Year Parts & Labor on entire machine.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for
warranty in other countries.
34
1/4
" x 28
1/4
" x 32
1/2
”
SD-700
SANITARY CUBELET ICE MACHINE/DISPENSER
OPTI-SERVE SERIES
*Hands-free sensor designed for use
with opaque containers.
Not intended for outdoor use - avoid
placement in direct sunlight.
Water-Cooled
DCM-751BWH-OS
34" x 28" x 32
3/4
”
SD-750
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or
Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard
Pipe (open drain system) or Copper Water Tubing (closed loop
system) or Equivalent
Air / Water Temp
Lbs. per 24 hours
Condenser
Model
70°/ 50°F 90°/ 70°F
ICE PRODUCTION
Potable
Gal. per 100 lbs.
Condenser
Gal. per 100 lbs.
Max. Fuse Size
or HACR
Circuit Breaker
Heat
Rejection
BTU/hr.
Shipping
Weight
Voltage
ENERGY
STAR
®
WATER USAGE
90°/ 70°F 90°/ 70°F
ELECTRICAL
90°/ 70°F
kWh Used
per 100 lbs.
Amperage
801
DCM-751BAH-OS
583
5.94
12.0 N/A 20A 9,300 345 lbs.115V/60/1
Air-Cooled
7.3A
782
DCM-751BWH-OS
678
4.76
12.0 96 20A 7,600 345 lbs.115V/60/1
Water-Cooled
7.9A
Type of Ice
(Hardness Rating)
Cubelet (90)
Cubelet (84.1)