Manualshelf

Instruction Manual

ManualsBrandsHoshizaki ManualsCommercial EquipmentDB-200H 30" ADA Compliant Hotel Sanitary Cube Dispenser with Built-In 140 lbs. Insulated Polythylene-Lined Ice Storage Bin and Pushbutton Single Auger Agitator: Stainless Steel
12345678910
6
II. INSTALLATION AND OPERATING INSTRUCTIONSII. INSTALLATION AND OPERATING INSTRUCTIONS
II. INSTALLATION AND OPERATING INSTRUCTIONSII. INSTALLATION AND OPERATING INSTRUCTIONS
II. INSTALLATION AND OPERATING INSTRUCTIONS
1. CHECKS BEFORE INSTALLATION1. CHECKS BEFORE INSTALLATION
1. CHECKS BEFORE INSTALLATION1. CHECKS BEFORE INSTALLATION
1. CHECKS BEFORE INSTALLATION
IMPORTANTIMPORTANT
IMPORTANTIMPORTANT
IMPORTANT
1. This ice dispensing bin is designed and intended to be used in combination
with a Hoshizaki Modular Crescent Ice Cuber, Models KM-280M,
KM-500M, or KM-630M.
It cannot be recommended to use this ice dispensing bin in combination
with any cuber or flaker other than a Hoshizaki Modular Crescent Ice
Cuber.
2. Remove shipping carton, tape(s) and packing to prevent damage to the ice
dispensing bin.
3. Ensure all components, fasteners and thumbscrews are securely in place.
1) Remove the Front panel to prevent damage before installing.
2) Remove the package containing the accessories.
3) Remove the protective plastic film from the Side Panels. If the ice dispensing bin has
been exposed to the sunlight or to direct heat, it should be allowed to cool before
removing the protective film.
4) See the Nameplate, located on the upper part of the Right Side Panel. Check that
the voltage supplied corresponds with the voltage specified on the Nameplate.