Instruction Manual
Table Of Contents
- Important Safety Information
- I. Installation Instructions
- II. Operating Instructions
- III. Cleaning and Maintenance Instructions
- IV. Preparing the Appliance for Periods of Non-Use
- V. Disposal
9
Fig. 2
2. Check the Refrigeration Circuit
• Visually check that the refrigerant lines do not rub or touch other lines or surfaces and
that the condenser fan blade turns freely.
• Check that the compressor is securely attached.
3. Position the Appliance and Lock the Front Casters
The front casters on the appliance are lockable. After positioning the appliance in its nal
location, lock the front casters.
4. Remove the Nylon Ties and Adjust the Shelves
Shelves are pre-installed. There is 1 shelf per section.
1) Remove and discard the nylon ties used to secure the shelves during shipping. See
Fig.2. Use caution to prevent damage to the shelf and appliance interior.
2) To adjust a shelf, rst remove the shelf from the appliance. Position the shelf support
clips on the pilasters at the desired shelf height, then place the shelf in position.
Shelf Support Clip
Pilaster
Shelf
Nylon Tie