Specification

The exterior cabinet front, sides, and top are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior
walls and ceiling are anodized aluminum. The floor is constructed of heavy gauge stainless steel with coved corner construction. Heavy duty ABS thermal breaks are used
to reduce heat transfer in the frames. Cabinet walls and drawers are insulated with 2" of environmentally friendly R-134a, CFC free, foamed in place polyurethane. 4" heavy
duty platform casters (all with brakes) are standard and installed at the factory.
Cabinet Construction
Drawer fronts are constructed of high grade stainless steel with stainless steel interior and are insulated with R-134a CFC free foamed in place polyurethane. Left drawers
accommodate (3) 12” X 20” X 6” deep pans (pans by others). Right drawers accommodate (2) 12” X 20” X 6”. (Drawers will also accept 1/6
th
, 1/3
rd
, and 1/2 size pans with
optional adapter bars). Drawer module frames are formed of 14 gauge stainless steel all welded construction and securely fastened in the cabinet. The drawer slides are
constructed of heavy duty 14 gauge stainless steel with durable acetal rollers with stainless steel ball bearings to prevent metal to metal contact. The drawer slides have
been life tested (fully loaded) three hundred thousand cycles without showing significant wear. The flush mount handles are constructed of extruded aluminum. Snap-in
magnetic drawer gaskets are durable and easily removed for cleaning.
Solid state digital controller with temperature alarms maintains optimum cabinet temperature. A LED display shows the cabinet temperature and is adjustable to Fahrenheit
or Celsius. The CRES85 has a front breathing refrigeration system. The high efficiency refrigeration system is standard with an enamel coated evaporator for extended life.
Condensate removal is accomplished with an energy efficient hot gas condensate evaporator system. A capillary tube controls the flow of environmentally friendly R-134a
refrigerant through the evaporator. Refrigeration system utilizes a heated defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with an eight foot
cord and plug (20.0 amps or less).
Drawer Construction
Refrigeration System
85”
33.25”
55.75”
85”
4”
26”
1”
27”
1.5”
31.75”
54.25”
CRES85
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
CRES85
02/10/16
Item # 13385
Commercial Series
Low-Profile Refrigerated Equipment Stand
Printed in the U.S.A.
16 gauge stainless steel
top with 1” drip edge
• Top: A minimum of 4” (11cm) clearance is required
between the bottom of the cooking equipment heating
element and the appliance top
• Sides: 1” (25mm) clearance
• Rear: The factory installed rear bumpers must be in
place to ensure proper rear clearance.
20.25”
SIDE VIEW
PLAN VIEW
FRONT VIEW
CLEARANCE