Specification

Dimensions / Capacity
Overall Width x Depth
Height To Work Surface
(including 4" casters)
Depth with Drawer Fully Open (including 1.5" rear bumper)
Pan Capacity (12" x 20")
Maximum Pan Depth
Maximum Load Capacity
Crated Shipping Weight
Crated Height x Width x Depth
85" x 33.25"
26"
55.75"
10
6"
1200 lbs
540 lbs
28.75" x 87" x 34.5"
Features
• Stainless steel exterior front, sides and top
• Anodized aluminum interior sides and back with
stainless steel interior floor
• Solid state digital controller with temperature alarms
and LED display (Fahrenheit or Celsius)
• Cabinet and drawers are insulated with 2” CFC free
foamed in place polyurethane
• Stainless steel exterior drawer with stainless steel
interior
• Drawer slides are constructed of 14 gauge stainless
steel with acetal rollers and drawer stops
• Left drawers will accommodate (3) 12” x 20” x 6”
deep pans (pans by others). Right drawers will
accommodate (2) 12” x 20” x 6” deep pans (pans by
others).
• Drawer frames are formed of 14 gauge stainless steel
and securely fastened to cabinet
• Drawers are equipped with finger cut-outs for easy
removal of pans
• Extruded aluminum flush mount drawer handles
• Magnetic drawer gasket is easily removable for cleaning
• Removable stainless steel end panel for access to
refrigeration system
• Enamel coated evaporator coil
• Energy efficient automatic hot gas condensate
evaporator
• Standard with (6) 4" casters all with brakes
• 8 ft. cord and plug
Electrical / Refrigeration
Voltage
HACR Breaker
Electrical Connection
(NEMA)
Voltage Range
Ambient Temp. Range
Control Setpoint Range
Amperage
Energy Consumption
(kwh/day) @NSF
Heat Rejection (BTU/Hr.) @NSF
Approx. Nominal Compres. BTU/HR (HP)
Refrigerant / Charge Amount (g) (oz)
115/60/1
15.0 Amps
5-15P
104-126
45° to 100°F
28° to 45°F
4.3
3.8
538
1386 (1/5HP)
R-134a / (242g) (8.5 oz)
Options
Hoshizaki reserves the right to change specifications without notice.
CRES85
02/10/16
Item # 13385
CRES85
Commercial Series
Low-Profile Refrigerated Equipment Stand
Item #:
Project:
Qty:
AIA#:
Two Section
CRES85
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
Two Section
CRES85
Heavy duty 16 gauge stainless steel top
with marine edge (front/rear), drip
edge (sides)
Ceramic heat shield integral to top
protects food from high heat
1200 pound capacity provides sturdy
base for cooking equipment
Valid in United States, Canada, Puerto
Rico and U.S. Territories. Contact
factory for warranty in other countries.
Warranty
3 Year - parts and Labor on
entire machine.
5 Year - Parts on Compressor
W x D x H
85” x 33.25” x 26”*
*to work surface with 4” casters
*
*
Model CRES85
Printed in the U.S.A.
HS-4007 - Drawer divider bars
HS-5180 - Condenser Filter