Service manual

7
NOTICE
• Protect the oor when moving the appliance to prevent damage to the oor.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction. The factory-installed rear bumpers must be in place to ensure
proper rear clearance. Blockage of airow could negatively affect performance and
damage the appliance.
To prevent deformation or cracks, do not spray insecticide onto the plastic parts or
let them come into contact with oil.
To avoid damage to the gasket, use only the door/drawer handle when opening and
closing.
• Do not leave the doors/drawers open.
To avoid damage to the top seal, do not lift the appliance by the top section or
remove the top section.
Additional Notice for CPT Models
• Do not allow the appliance to bear any outside weight.
• Do not place anything on top of the rail cover and do not lift the appliance by the rail
cover. The rail cover is not designed to bear any outside weight.
• Do not place anything on the air duct panels beneath the pans in the rail. The air
duct panels are not load-bearing.