Specifications Sheet

The exterior cabinet front, sides, and top are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior
walls and ceiling are anodized aluminum. The floor is constructed of heavy gauge stainless steel with coved corner construction. Heavy duty ABS thermal breaks are used
to reduce heat transfer in the frames. Cabinet walls and drawers are insulated with 2" of environmentally friendly R-134a, CFC free, foamed in place polyurethane. 4" heavy
duty platform casters (all with brakes) are standard and installed at the factory.
Cabinet Construction
Drawer fronts are constructed of high grade stainless steel with stainless steel interior and are insulated with R-134a CFC free foamed in place polyurethane. Each drawer
accommodates (3) 12” X 20” X 6” deep pans (pans by others). (Drawers will also accept 1/6
th
, 1/3
rd
, and 1/2 size pans with optional adapter bars). Drawer module frames
are formed of 14 gauge stainless steel all welded construction and securely fastened in the cabinet. The drawer slides are constructed of heavy duty 14 gauge stainless steel
with durable acetal rollers with stainless steel ball bearings to prevent metal to metal contact. The drawer slides have been life tested (fully loaded) three hundred thousand
cycles without showing significant wear. The flush mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed
for cleaning.
Solid state digital controller with temperature alarms maintains optimum cabinet temperature. A LED display shows the cabinet temperature and is adjustable to Fahrenheit
or Celsius. The CRES110 has a front breathing refrigeration system. The high efficiency refrigeration system is standard with an enamel coated evaporator for extended life.
Condensate removal is accomplished with an energy efficient hot gas condensate evaporator system. A capillary tube controls the flow of environmentally friendly R-134a
refrigerant through the evaporator. Refrigeration system utilizes a heated defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with an eight foot
cord and plug (20.0 amps or less).
Drawer Construction
Refrigeration System
110.5”
33.25”
55.75”
110.5”
4”
26”
1”
SIDE VIEW
PLAN VIEW
FRONT VIEW
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
Printed in the U.S.A.
• Top: A minimum of 4” (11cm) clearance is required
between the bottom of the cooking equipment heating
element and the appliance top
• Sides: 1” (25mm) clearance
• Rear: The factory installed rear bumpers must be in
place to ensure proper rear clearance.
CLEARANCE
16 gauge stainless steel
top with 1” drip edge
27”
1.5”
31.75”
54.25”
20.25”
CRES110
11/15/16
Item # 13399
CRES110
Commercial Series
Low-Profile Refrigerated Equipment Stand