Service Manual
Table Of Contents
- Important Safety Information
- I. Construction and Refrigeration Circuit Diagram
- II. Sequence of Operation and Service Diagnosis
- III. Controls and Adjustments
- IV. Refrigeration Circuit and Component Service Information
- V. Maintenance
- VI. Preparing the Appliance for Periods of Non-Use
- VII. Disposal
- VIII. Technical Information
27
7) Remove the ller cap, ller screws, and spring cartridge. See Fig. 7. Leave the
thrust-washers in place on the spring cartridge. NOTICE! Spring cartridge may be
difficult to remove. Be careful not to damage the nish.
Filler Cap
Door
Spring Cartridge
Filler Screws
Thrust-Washers
Screws
Fig. 7
Filler Screws
Filler Cap
Door
Spring Cartridge
Screws
Fig. 8
Spring Cartridge Hole
8) Clear material from the spring cartridge hole to allow for spring cartridge installation.
Reinstall the ller cap, ller screws, and spring cartridge on the opposite side of the
door. See Fig. 8.