Specifications Sheet

Cabinet Construction
Door Construction
Refrigeration System
The high efficiency refrigeration system is self-contained with an epoxy electrocoated (E-Coat) evaporator for extended life. Top mounted refrigeration system is easily
accessible for service. The refrigeration system components are assembled on a high density expanded polypropylene platform that is removable from the main unit. A
unique ducted air flow system achieves uniform air distribution within the cabinet to eliminate hot spots. Condensate removal is accomplished with an energy efficient non-
electric evaporation system. A thermostatic expansion valve (TXV) controls the flow of environmentally friendly R-404A refrigerant through the evaporator. Refrigeration
system utilizes a heated defrost to eliminate any ice on the evaporator coil. Solid state digital controls monitor the operation and performance of the refrigeration system.
The controls also provide visual high and low temperature and high and low voltage alarms. A LED display shows the cabinet temperature and is adjustable to Fahrenheit or
Celsius. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less).
SIDE VIEW
FRONT VIEW
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
Printed in the U.S.A.
CF1S-FS(L)
Commercial Series Freezers
79.75”
CF1S-FS
CF1S-FS(L)
PLAN VIEW
CF1S-FS(L)
1/29/16
Item # 13363
The exterior cabinet front, and sides, are constructed of high quality stainless steel. The exterior top, back, and bottom are constructed of coated steel. The cabinet interior is
constructed of stainless steel with a unique “ducted” air flow system. Three (3) heavy duty epoxy coated shelves per section are standard. Mounted on stainless steel pilasters
shelves are adjustable in 1” increments. Cabinet walls and doors are insulated with 2-3/8” of environmentally friendly, CFC free, foamed in place polyurethane. Perimeter door
heaters prevent condensation from forming on the face of the cabinet. An interior light is automatically activated when doors are opened. 4” polyolefin, casters (two with
brakes) are standard.
Doors are constructed of a high grade stainless steel exterior and interior and are standard with locks. Hoshizaki’s exclusive “stepped” design protects the recessed gasket
while product is being removed from the cabinet. Doors are provided with a one piece, full length extruded aluminum flush mount handle and are mounted on eight (8) gauge
stainless steel hinge plates with a welded hinge pin. Spring assisted self-closing doors are equipped with a stay open feature past 90 degrees. Snap-in magnetic door gaskets
are easily removed for cleaning. Door hinging is field reversible (with an optional door reversal hinge kit).
CF1S-FSL
33.75”
27.5”
CF1S-FS
(Showing Right Swing)
CF1S-FSL
(Showing Left Swing)
CF1S-FS(L)
59.5”
33.75”
59.25”
79.75”
75.75”
4”