Smart Hub User Manual
① Connect Smart Hub with Smartphone/Tablet Plug the Smart Hub into a power outlet using the included power cord. Then, you may need to check whether Smart Hub is ready to be registered. You will see the slowly blinking purple LED light on the middle-button of Smart Hub with BEEP BEEP sound when it is available for its installation. Otherwise, you may need to reset it by pressing Reset Button for 10 seconds on its backside.
[Connect Smartphone/Tablet with WiFi] Enter Camera Name, Password, Wi-Fi ID, and Wi-Fi Password
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
