Data Sheet

CentaurStat
The Centaurstat can replace any existing room
thermostat without the need to add any additional
cabling. This is because the Centaurstat runs on 3 AA
batteries meaning no separate mains supply is needed.
When used with an existing hot water and heating
programmer the heating programme should be set to
constant with the Centaurstat taking over the time and
temperature programme.
Specification
CONTACT RATING 8 (3) Amps 230V AC
POWER SUPPLY 3 x AA alkaline
batteries
SUPPLY 230V AC 50Hz only
POLLUTION DEGREE Degree 2 - Normal
Situations
ENCLOSURE PROTECTION IP30
DOUBLE INSULATED Yes
OPERATING TEMPERATURE 0°C to +40°C
RANGE
TEMPERATURE LEVELS CentaurStat 1 - 6 per
24 hours
CentaurStat 7 - 6 for
workdays and 6 for
rest days
TEMPERATURE SETTING +5 °C to +30 °C
RANGE OFF
TEMPERATURE
DIFFERENTIAL < 0.5 ° per hour at 4°C
BATTERY LIFE In excess of 2 years
DIMENSIONS 142 x 71 x 30 mm
DISPLAY Back lit liquid crystal
CLOCK Target temperature
indication with 12
hour
AM/PM clock or
actual temperature
Auto BST/GMT
changeover
DISPLAYED TIME 1 minute steps
ADJUSTMENTS
SWITCHED TIME 10 minute steps
ADJUSTMENTS
OVERRIDE Temporary override
until next preset
period. Temperature
lock, permanent
temperature override
until reset
MOUNTING Directly to a wall or
onto a single or
double gang flush
wiring box to BS4662
by means of a patress.
Patress available on
request
Part No. P82163 Issue 8
South Bristol Park, Roman Farm Road, Bristol BS4 1UP
t: [phone] | f: [phone] | e: [e-mail] | www.horstmann.co.uk
Horstmann is a trading name of Secure Controls (UK) Ltd., a wholly owned subsidiary of Secure Holdings PTE Ltd.
Registered office: Secure House, Moorside Road, Winnall Trading Estate, Winchester, Hampshire, SO23 7RX. Registered in England No. 457553
© January 2013: Secure Controls (UK) Ltd: All rights reserved. The company reserves the right to alter product specifications without notice.