Data Sheet

A single circuit combined time and temperature control

allowing up to six different temperature levels to be

programmed over a 24 hour cycle. The 7 day version allows

different days of the week to have individual programmes

whereas the 24 hour version allows the same programme to

be repeated daily.

Centaurstat is battery powered to allow easy replacement of

an existing room thermostat with no extra wiring needed.

Voltage free contacts make it ideal for the control of Combi

boilers. TPI energy saving software reduces energy usage by

its close temperature control when compared with old style

mechanical thermostats.

Ÿ Voltage free contacts

Ÿ Battery powered

Ÿ Ideal for use with combi boilers

Ÿ 24 hour or 7 day versions

Ÿ Up to six temperature settings per day

Ÿ Instant temperature override

Ÿ TPI energy saving software

Ÿ Battery low indicator

CentaurStat

Electronic Programmable room thermostat

PAGE 1
CentaurStat Electronic Programmable room thermostat A single circuit combined time and temperature control allowing up to six different temperature levels to be programmed over a 24 hour cycle. The 7 day version allows different days of the week to have individual programmes whereas the 24 hour version allows the same programme to be repeated daily. Centaurstat is battery powered to allow easy replacement of an existing room thermostat with no extra wiring needed.
PAGE 2
Specification CentaurStat The Centaurstat can replace any existing room thermostat without the need to add any additional cabling. This is because the Centaurstat runs on 3 AA batteries meaning no separate mains supply is needed. When used with an existing hot water and heating programmer the heating programme should be set to constant with the Centaurstat taking over the time and temperature programme.